Analog Audio Extender Set

Analog Audio Extender Set
Analog Audio Extender Set
Analog Audio Extender Set
Analog Audio Extender Set
Analog Audio Extender Set
Analog Audio Extender Set
Analog Audio Extender Set
€318.49 *

If applicable prices plus VAT plus shipping costs

Delivery time approx. 5 working days

Audio Extender Set to transmit analog audio signals over 300m  ... more
Product information "Analog Audio Extender Set"
Audio Extender Set to transmit analog audio signals over 300m

 

What you need to know about the audio extender set

The trivum Audio Extender Set is a professional solution for transmitting analog audio signals over large distances using standard network cables.

The set consists of 3 parts:

  1. Audio transmitter XT:LINE
  2. Audio Receiver XR:LINE
  3. power supply

 You can find the detailed description of the individual products as links in the 'Content' tab or simply click on the list above.

 


Properties of the audio extender set

The trivum audio extender solution has the following advantages over direct connections (simple adapters or adapters with galvanic isolation):

  • up to 300 meters
    The active symmetrical transmission of signals (audio + trigger + power supply) is the basis of the trivum Audio Extender solution. 
  • Interference-free
    Due to the symmetrical audio transmission, interfering noise caused by interference in the cable route is minimized. Thanks to its advantages, this complex technical solution is standard in many studios today.
  • Hum-free
    Due to the active galvanic separation of the transmitter and receiver, there can be no hum loop caused by potential differences.
  • Neutral sound
    In contrast to the solution using passive galvanic isolation using transformers, the trivum solution is better in terms of sound, because transformers change the sound image and cut or distort the frequency response. The OP-Amps used in the active trivum extenders are technically far superior to the passive solution. 
  • No time delay
    In contrast to products that work via IP networks, the trivum solution has no delay. IP solutions (radio or cable) have to digitize the audio signal, then transfer the data in packets over the network, then reassemble them in a buffer in order to convert them into an audio signal. That takes too long to e.g. transmit TV sound lip-synchronously.
  • With trigger signal
    A trigger signal is passed potential-free from the transmitter to the receiver. The voltage is adjusted to 12V. The trigger input reacts with high resistance to voltages between 5V and 24V. The trigger signal is then available at the receiver with a load capacity of 12V / 80mA.
  • Groundlift switch
    Groundlift prevents hum loops, as it separates the signal ground from the transmitter and receiver. Groundlift should therefore be active by default. In rare cases it can still be helpful not to activate the ground lift: If excessive disturbances are not produced by ground loops. These disturbances (whistling, buzzing, rattling) are caused by unclean switching power supplies or plug-in power supplies without grounding.
  • Unproblematic placement
    In contrast to passive Galvian separation by means of transmitters, the trivum solution is not magnetically susceptible to interference. Therefore, the adapter can be placed anywhere, including in the area of ​​power supplies. 

 


Connections of the XT:LINE

  • Input
    • 2x RCA (1x analog stereo L / R)
    • 1x 2-pin socket with terminal block
    • 1x socket for power supply
  • Output
    • 1x RJ45 (1x audio bus with CAT 5/6/7 cable up to 300m) 

 


Connections of the XR:LINE

  • Output
    • 2x RCA (1x analog stereo L / R)
    • 1x 2-pin socket with terminal block
    • 1x socket for power supply
  • Input
    • 1x RJ45 (1x audio bus with CAT 5/6/7 cable up to 300m) 

 


Scope of delivery

 


Connection example

  
XT:LINE trivum Audio Transmitter
Related links to "Analog Audio Extender Set"
Das Set besteht aus 3 Teilen: Audio Transmitter  XT:LINE Audio Receiver ...
Product Information "Inhalt"

Das Set besteht aus 3 Teilen:

  1. Audio Transmitter XT:LINE
  2. Audio Receiver XR:LINE
  3. Netzteil
Follow us